Avery 9860 Instructions d'exploitation télécharger pdf (Page 58)

Updating Firmware

You can update the printer’s firmware. Make sure the Resident (Boot

Loader) is version 2.3 or greater.

1. From the side Menu Bar, click Firmware Update.

2. Make sure your printer is connected and ready to receive data.

3. Enter the TFTP Server IP Address.

4. Enter the Firmware Path and Filename (relative pathname to your

TFTP server). Refer to your TFTP Server’s documentation for more

information about setting up and using the TFTP server.

Note: Depending on your TFTP server, you may only need the

filename, not the entire path.

5. Click Submit to load the firmware. If you lose power while updating

the firmware, call Service.

3-24 MonarchNet2 Operating Instructions

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 113 114

Pas de commentaire

Avery 9860 Instructions d'exploitation Page 58