Avery 9860 Instructions d'exploitation télécharger pdf (Page 40)

7. Set the Skip Index mode: No or Yes. Skip index allows you to print

an image over multiple labels.

8. Set the Backfeed: Off, On, or Extended. Backfeed advances each

printed label to the specified dispense position and then backs up the

next label to be printed underneath the printhead. Do not use

extended backfeed on non-knife printers.

9. Enter a value for the Dispense Position (range is 50 to 200).

This adjusts the stopping point of the label after it is printed.

10. Enter a value for the Backfeed Distance (range is 10 to 200).

This is the amount to move the label backwards before printing.

11. Enter a value for the Contrast (range is –699 to 699).

This adjusts the darkness of printing on the supply.

12. Enter a value for the Print Position (range is –450 to 450).

This adjusts where data prints vertically on the supply.

13. Enter a value for the Margin Position (range is –99 to 99).

This adjusts where data prints horizontally on the supply.

14. Click Submit when finished.

3-6 MonarchNet2 Operating Instructions

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 113 114

Pas de commentaire

Avery 9860 Instructions d'exploitation Page 40