Avery 9860 Instructions d'exploitation télécharger pdf (Page 41)

Changing the System Setup

Only configure the settings required for your network/printer.

1. On the System Setup tab, set the Flash Storage: Enabled or

Disabled. Flash storage allows packets with “R” or “N” selectors to

be stored in Flash Memory, instead of volatile RAM. Packets stored

in flash memory are saved when the printer is turned off.

2. Set the Speed Adjustment: Default, 2.5, 4.0, 6.0, 8.0 10.0, or

12.0 ips. If you select “Default,” serial bar codes print at 2.5 ips;

parallel bar codes print at 6.0 ips.

3. Set the Power Up Mode: Online or Offline.

4. Select the Prompt Set: English, French, German, Spanish-ES,

Japanese, Portuguese, Italian, Swedish, Spanish-MX, Danish, Dutch,

Finnish, or Norwegian.

5. Set the Monetary Sign: None, USA, UK, Japan, Germany, France,

Spain, Italy, Sweden, Finland, Austria, India, Russia, Korea,

Thailand, China, Euro-Dollar.

6. Set the Secondary Sign: No or Yes.

7. Set the number of Decimal Places: 0, 1, 2, or 3.

Using a Web Browser

8. Select Slashed Zero to print zeros with a slash (Ø): No or Yes.

3-7

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 113 114

Pas de commentaire

Avery 9860 Instructions d'exploitation Page 41